|
Parameter |
Current Value(s) | Possible Value(s)/Format |
Sublevel |
Error | Description |
|---|---|---|---|---|---|
| 'keywords_vocabulary' | The parameter doesn't exist. | If you are using a controlled vocabulary for the words/phrases in your 'keywords' attribute, this is the unique name or identifier of the vocabulary from which keywords are taken. | |||
| 'references' | Must not be blank field. | Published or web-based references that describe the data or methods used to produce it. | |||
| 'sensor_band_central_radiation_frequency' | The parameter doesn't exist. | This attribute should be set to the center frequencies (s-1) of those channels used to generate the product. If more than one channel, please use the comma to separate them. Also make sure the order is the same as one in the above sensor band field. | |||
| 'sensor_band_identifier' | The parameter doesn't exist. | This attribute should be set to the instrument channels used to generate the product. If more than one channel, please use the comma to separate them like '01, 02, 04'. |
|
Parameter |
Current Value(s) | Possible Value(s)/Format |
Sublevel |
Error | Description |
|---|---|---|---|---|---|
| 'cdm_data_type' | 'grid' |
'Grid' 'Image' 'Point' 'Radial' 'Station' 'Swath' 'Trajectory' |
Must take one of the given values. | This attribute describes the geographic category the product data represents. The data type, as derived from Unidata's Common Data Model Scientific Data types and understood by THREDDS. | |
| 'creator_email' | '@' | Must contain the string or character '@'. | Include an e-mail for the algorithm development team. | ||
| 'creator_url' | 'http' | Must contain the string or character 'http'. | All product projects should have a Web site that users can access. | ||
| 'day_night_data_flag' |
'day' 'night' 'both' |
The parameter doesn't exist. | This attribute should be set to string values of 'day', 'night', or 'both' depending on sunlight conditions for observation. | ||
| 'id' | 'MTCSWA-SH902023_v1r1_blend_s202303151226020_e202303151526020_c202303151937480.nc' | 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx' | Identifier, id, doesn't follow the pattern 'xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx' where x is any hexadecimal digit, i.e., a number 0 through 9 or a letter a through f, and y is one of 8, 9, A, or B; NOT case sensitive and NOT '-' sensitive. | Unique User Identifier (UUID) Version 4. Version 4 UUIDs have the form xxxxxxxx-xxxx-4xxx-yxxx-xxxxxxxxxxxx where x is any hexadecimal digit and y is one of 8, 9, A, or B., creating an identifier like: f47ac10b-58cc-4372-a567-0e02b2c3d479. | |
| 'institution' | 'DOC/NOAA/NESDIS/OSPO > Office of Satellite and Product Operations, NESDIS, NOAA, U.S. Department of Commerce' | 'DOC/NOAA/NESDIS/OSPO > Office of Satellite and Product Operations, NESDIS, NOAA, U.S. Department of Commerce.' | Must take one of the given values. | This attribute should be 'DOC/NOAA/NESDIS/OSPO > Office of Satellite and Product Operations, NESDIS, NOAA, U.S. Department of Commerce.'. | |
| 'keywords' | The parameter doesn't exist. | A comma-separated list of key words and/or phrases. Keywords may be common words or phrases, terms from a controlled vocabulary (GCMD is often used), or URIs for terms from a controlled vocabulary (see also 'keywords_vocabulary' attribute). | |||
| 'metadata_link' |
'http' 'MTCSWA-SH902023_v1r1_blend_s202303151226020_e202303151526020_c202303151937480.nc' |
The parameter doesn't exist. | A URL that gives the location of more complete metadata or a product information web page. A persistent URL is recommended for this attribute. If the only available metadata is contained in this file, then the name of this file is sufficient. | ||
| 'naming_authority' | 'gov.noaa.nesdis.ncei' |
'gov.noaa.nesdis.ospo.' 'gov.noaa.nesdis.ospo' |
Must take one of the given values. | This attribute should be organization that provides the 'id' attribute, which is the NCEI 'gov.noaa.nesdis.ncei.', or 'gov.noaa.nesdis.ncei', for NDE projects and OSPO 'gov.noaa.nesdis.ospo.', or 'gov.noaa.nesdis.ospo', for NCCF projects. | |
| 'project' | 'NPP Data Exploitation' | 'NESDIS Common Cloud Framework' | Must take one of the given values. | For all files that are created by the NCCF, this attribute should be 'NESDIS Common Cloud Framework.' | |
| 'publisher_name' | 'DOC/NOAA/NESDIS/NDE > NPP Data Exploitation, NESDIS, NOAA, U.S. Department of Commerce' | 'DOC/NOAA/NESDIS/OSPO > Office of Satellite and Product Operations, NESDIS, NOAA, U.S. Department of Commerce.' | Must take one of the given values. | For NDE Products: NDE is responsible for generating all NUPs. This attribute should be 'DOC/NOAA/NESDIS/NDE > NPP Data Exploitation NESIDS, NOAA, U.S. Department of Commerce.'. For NCCF Products: NCCF is responsible for generating all NUPs. This attribute should be 'DOC/NOAA/NESDIS/OSPO > Office of Satellite and Product Operations, NESIDS, NOAA, U.S. Department of Commerce.'. | |
| 'source' | Must not be blank field. | This attribute should list all major input files as a comma delimited list. | |||
| 'title' | 'MTCSWA' | 'MTCSWA_SH902023' | Must take one of the given values. | This attribute should be set to the NUP product short name (e.g., MIRS_IMG). Product short name must be unique and descriptive, and use underscores for separation. | |
| 'geospatial_lat_resolution' | Grid. | The parameter doesn't exist. | Information about the targeted spacing of points in latitude. Recommend describing resolution as a number value followed by the units. Examples: '100 meters', '0.1 degree'. | ||
| 'geospatial_lon_resolution' | Grid. | The parameter doesn't exist. | Information about the targeted spacing of points in longitude. Recommend describing resolution as a number value followed by units. Examples: '100 meters', '0.1 degree'. | ||
| 'ascend_descend_data_flag' |
0 1 2 |
Orbit. | The parameter doesn't exist. | This attribute indicates whether the satellite is moving northward or southward. The center time of an observation is used. This attribute should be set to 0 for ascending/northward, 1 for descending/southward, and 2 if transitioning. | |
| 'end_orbit_number' | Orbit. | The parameter doesn't exist. | This attribute is a sequential whole number set by the S-NPP/JPSS Ground System in the xDR metadata. | ||
| 'start_orbit_number' | Orbit. | The parameter doesn't exist. | This attribute is a sequential whole number set by the S-NPP/JPSS Ground System in the xDR metadata. Orbits are incremented on the northward equatorial node. | ||
| 'geospatial_bounds' | Swath. | The parameter doesn't exist. | This attribute describes a closed polygon of N (N>3) latitude and longitude vertices. The last latitude/longitude pair must be identical to the first pair. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). This should be 'POLYGON((lon1 lat1, lon2 lat2,...,lonN latN, lon1 lat1)). | ||
| 'geospatial_bounds' | Swath. | The geospatial bounds are not valid or don't exist; geospatial validation couldn't be run. Invalid or non-existing value(s). | Geospatial validation involves the validation of the GRID and SWATH values. | ||
| 'geospatial_first_scanline_first_fov_lat' | Swath. | The parameter doesn't exist. | These attributes describe the four-point geolocated latitude and longitude (polygon) that describes the geographic context for the NUP observation. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). | ||
| 'geospatial_first_scanline_first_fov_lon' | Swath. | The parameter doesn't exist. | These attributes describe the four-point geolocated latitude and longitude (polygon) that describes the geographic context for the NUP observation. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). | ||
| 'geospatial_first_scanline_last_fov_lat' | Swath. | The parameter doesn't exist. | These attributes describe the four-point geolocated latitude and longitude (polygon) that describes the geographic context for the NUP observation. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). | ||
| 'geospatial_first_scanline_last_fov_lon' | Swath. | The parameter doesn't exist. | These attributes describe the four-point geolocated latitude andlongitude (polygon) that describes the geographic context for the NUP observation. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). | ||
| 'geospatial_last_scanline_first_fov_lat' | Swath. | The parameter doesn't exist. | These attributes describe the four-point geolocated latitude and longitude (polygon) that describes the geographic context for the NUP observation. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). | ||
| 'geospatial_last_scanline_first_fov_lon' | Swath. | The parameter doesn't exist. | These attributes describe the four-point geolocated latitude and longitude (polygon) that describes the geographic context for the NUP observation. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). | ||
| 'geospatial_last_scanline_last_fov_lat' | Swath. | The parameter doesn't exist. | These attributes describe the four-point geolocated latitude and longitude (polygon) that describes the geographic context for the NUP observation. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). | ||
| 'geospatial_last_scanline_last_fov_lon' | Swath. | The parameter doesn't exist. | These attributes describe the four-point geolocated latitude and longitude (polygon) that describes the geographic context for the NUP observation. Latitude values include -90 (south) to 90 (north) degrees and longitude values include -180 (west) to 180 (east). | ||
| 'orbit_number' | Orbit. | The start and/or end orbit number could not be found, so the overall orbit number cannot be validated; please check the file. Value(s) not found. | Orbit numbers must be in the proper order. |
|
Parameter |
Current Value(s) | Possible Value(s)/Format |
Sublevel |
Error | Description |
|---|---|---|---|---|---|
| 'quality_information' | The quality information doesn't exist, value not found, this is required for this standard. Add the fields: 'long_name', 'total_number_retrievals', 'percentage_optimal_retrievals', 'percentage_sub_optimal_retrievals' and 'percentage_bad_retrievals'. |